Gigabyte M32Q User Manual Download Page 47

Page: 47 / 47

LCD Monitor User's Manual

Basic Care

When the screen becomes dirty, do the following to clean the screen:

•

Wipe the screen with your soft, lint-free cloth to remove any residual dust.

•

Spray or apply the cleaning fluid onto a soft cloth. Then wipe the screen

gently with the damp cloth.

Note:

•

Make sure that the cloth is damp, but not wet.

•

When wiping, avoid applying excessive pressure on the screen.

•

Acidic or abrasive cleaners can damage the screen.

Notes on USB Charging

The following devices are not compatible with BC 1.2 of CDP mode. When the Hub

is connected to a PC, these devices cannot be charged using the USB cable.

Vendor

Device

PID/VID

Apple

IPad

PID_129A/VID_05AC

Samsung

Galaxy Tab2 10.1

PID_6860/VID_04E8

Samsung

GALAXY TabPro

PID_6860/VID_04E8

GIGABYTE Service Information

More service information, please visit GIGABYTE official website:
https://www.gigabyte.com/

Summary of Contents for M32Q
















































Search results

Summary of Contents for M32Q

Reviews:

Related manuals for M32Q

Brands by name

Popular brands

Gigabyte M32Q, User Manual

Search results

Summary of Contents for M32Q

Reviews:

Related manuals for M32Q

Brands by name

Popular brands