- 10 -
GV-RX365512H Graphics Accelerator
How to enable the ATI CrossFire
TM
technology?
Step 1:
Install two CrossFire graphics cards of the same chipset on a CrossFire-supported motherboard and
connect the graphics cards via two CrossFire bridge interconnect cables (Figure 1). Then users can
enable the CrossFire technology through the graphics card driver.
Two CrossFire bridge
interconnect cables.
Two CrossFire graphics cards of the same type.
(Example: GV-RX195P256D-RH)
Figure 1
Step 2:
After installing graphics card driver in operating system, access the Catalyst Control Center (please
refer to Page 19). From the Catalyst Control Center, enter the CrossFire menu and assure to select the
Enable CrossFire
check box (Figure 2).
Step 3:
When the next confirmation dialog box appears (Figure 3), click
Yes
to complete the CrossFire
configurations.
Figure 2
Figure 3