Gigabyte GV-NX73G128D, User Manual

Page: 14 / 44

GV-NX73G Series Graphics Accelerator - 8 -
English
2. Replace the screw to fasten the card in
place, and replace the computer cover.
3. Plug the display cable into your card; then
turn on the computer and monitor. If your
graphics card came with a DVI-I connector,
you can connect a flat panel display to the
appropriate connector, as shown below...
You are now ready to proceed with the installation of the graphics card driver. Please
refer to next chapter for detailed instructions.
To TV/VCR
To VGA Monitor
To Flat Panel Display
To install your new graphics card:
1. Locate one PCI Express x16 slot. If
necessary, remove the metal cover from the
slot; then align your graphics card with the
PCI Express x16 slot, and press it in firmly
until the card is fully seated.
* Please make sure that the gold edge connectors
of the graphics card is securely inserted.