Gigabyte GV-GF3000D Series, User Manual

Page: 29 / 39

Sof tware Installation
3-17
3.2 WINDOWS NT 4.0 DRIVER INSTALLATION
Please make sure the Windows NT 4.0 have installed Windows NT 4.0
Service Pack version 3.0 (or later) before installing the GV-GF3000D
graphics accelerator driver.
1. Start Microsoft Windows NT 4.0.
2. Click the Start button on the control bar, point to Settings, and click Control
Panel.
3. Double-click Display, click the Settings tab, click Display Type, and then
click Change.
4. Insert the GIGABYTE NT Driver Library Installation CD into your CD-ROM,
then click “Have Disk”.
5. Select or type the path to CD-ROM\Driver\WinNT, then click OK.
Windows should find files for your graphics chip. If Windows cannot find
the files, check that the path name for the diskette is correct and that the
correct diskette is inserted in it.
6. If Windows found the files, select OK.
7. Click yes when Windows NT informs you that you are installing a third
party driver and asks if you wish to proceed .
Windows NT copies the files to the hard disk.
8. Click OK, then click Close.
9. Remove diskettes from the diskette drive, and then click “Yes” when
Windows NT asks if you wish to restart the computer.