1 4
GS-SR295 Rack mount Server
Step 2-5: PCI Expansion Card Installation
GS-SR295 provides expansion riser slots for four peripheral cards, two full-heigh 64bit/100MHz
PCI-X slots and one low profile with 64bit/100MHz and one low profile 64bit/133MHz PCI slots. To
install the peripheral, please go through the following steps.
Step 1 Lossen the screws to remove the riser bracket.
Step 2 Detach the riser bracket with both hands.
Step 3 Installing the PCI Riser card. Align the expansion card with the guide groove. Slide the
expansion board into the slot until the board firmly seats. Repeat Step 2 & 3 to install
remaining add-on cards.
Note:
When you install ZCR card, the second full-heightfull-length slot can not work properly.
Step 4 Replace the riser bracket into the system module (see the arrow direction mark), and push
down vertically.
Step 5 Reverse Step 1 & 2 to secure the riser bracket firmly. Installation completed.
Step 1
Step 2
Step 3
Full-height slots support 64bit/100MHz
Low profile 1st slot supports 64bit/100MHz
Low profile 2nd slot supports 64bit/133MHz
