Gigabyte GS-SR157L System Installation Manual Download

Page: 50 / 57

5 0

GS-SR157L Rack Mount Server

Terminal Type

This option allows user to select the specified terminal type. This is defined by IEEE.

Options

VT100, VT100 8bit, PC-ANSI 7bit, VT100+, VT-UTF8

Flow Control

This option provide user to enable the flow control function.

None

Not supported.

XON/OFF

Software control.

CTS/RTS

Hardware control. (Default value)

Console Connect

This field indicates whether the console is connected directly to the system or a modem is used
to connect.

Direct

Console is connected directly to the system. (Default)

Disabled

Console is connected via the modem.

Continue C.R. after POST

This option allows user to enable console redirection after O.S has loaded.

Enable console redirection after O.S has loaded.

Off

Disable this function. (Default value)

Summary of Contents for GS-SR157L


























































Search results

Summary of Contents for GS-SR157L

Reviews:

Related manuals for GS-SR157L

Brands by name

Popular brands

Gigabyte GS-SR157L, System Installation Manual

Search results

Summary of Contents for GS-SR157L

Reviews:

Related manuals for GS-SR157L

Brands by name

Popular brands