Hardware Installation
- 36 -
No.
Jumper Code
Jumper Setting
6.
PASSWORD
(Skip Supervisor
Password Jumper)
1-2 Close: Normal operation (Default setting)
2-3 Close: Skip supervisor password.
7/8.
SATA2_D/SATAD_3
(SATA port 2/3
DOM Jumper)
1-2 Close: Enable SATA2/SATA3 port DOM support.
2-3 Close: Normal mode. (Default setting)
CAUTION!
If a SATA type hard drive is connected to the system, please ensure the jumper is
closed and set to
2-3 pins
(Normal mode), in order to reduce any risk of hard disk damage.