21
(4) Enter a hint of your own in case you forget your password. You can enter anything you
want (maximum 32 characters long).
(5)Check “Show Password” box to see what you have entered.
(6) Press “Apply” to confirm changes. The following message window will pop up. This
message window tells you that the device will be automatically locked after you remove
the device from USB port.
(7) Once you have set the password correctly, you will notice the change in “Password
Status”.
(8) When you remove the device from USB port and re-insert it again, the device will
automatically be locked. If you try to access it, it will reply with error message.
(9) If you execute the Security AP, you will see that the device is LOCKED.
