15
SSID:
Network name.
Hide SSID:
Access Point disable their SSID broadcasting to prevent a wireless device
from finding and accessing their networks.
Tx Power:
Transmitter Output power.
MAC Address Filter:
You can set the configuration MAC Address Filter(
see
Figure 3-10
)
by clicking on this button
.
Figure 3-10
.
MAC Address Filter
Filter Type:
There are three status of a Access Point:
1.
Disable:
The Filter MAC Address function disable.
2.
Accept:
The Filter MAC Address (wireless LAN card) can connect to a Access
Point.
3.
Reject:
The Filter MAC Address (wireless LAN card) can’t connect to a Access
Point.
3-8. Bridge Setup
(Supported under Windows XP)
Step 1:
Change to AP mode
(
see
Figure 3-8
).
Step 2:
「
Control Panel
」
run
「
Network Connections
」
(
see
Figure 3-11
).
