background image

21 

 

Chapter 3    Using the Utility 

 

The Configuration & Monitor Utility is a powerful application that helps you to 

configure the network card and monitor the statistics of the communication link. This 
application permits the configuration for parameters while the card is operating. It also 
offers more configuration options and supports Windows 98SE/Me/2000/XP. It appears as 
an icon in the task bar at the bottom right corner of screen whenever the card is operating 

(see 

Figure 3-1

)

. The icon can tell you the received signal strength by four small lights. 

You can open it by double-clicking on this icon.

 

 
 

Figure 3-1.   

The icon of the Configuration & Monitor Utility

 

 

You may double click this icon to open the utility or go to Windows 

Start 

menu, select 

Programs, GIGA-BYTE 802.11 WLAN, GN-WI05GS

 and then 

GN-WI05GS Utility

 

Note:

 You can use the utility to change configuration when the WLAN card is operating. 

You have to use the network configuration tool provided by the operation system when the 
WLAN card is not in use.

 

 
 

3-1.“Profile” Setting 
 

The

 “Profile” 

tab shows you the current association information about the profile. 

(

see 

Figure 3-2

)

 

Figure 3-2.   

Current profile

 

 

Summary of Contents for GN-WI05GS-RH








































Reviews: