Gigabyte GN-FE605, User Manual

Page: 54 / 62

GN-FE605(M) PCI Adapter User’s Guide
52
Installation
Hardware Requirements
As the minimal configuration for all Windows operating systems, you must
have: A PC with a 486 processor or higher and speed of at least 33 MHz, a
minimum of 16 MB memory support.
Windows Platform Supports
Fundamental Functions:
Fundamental Functions are supported if you’re using Windows 95/98/ME,
Windows NT 4.0, Windows 2000, and Windows XP.
Advanced Management Functions:
Advanced Management Functions are only supported with Windows 2000,
and Windows XP.
Installation of NIC Control Set
1. Insert the Gigabyte CD into the CD-ROM drive. The CD autorun program
starts. Click FE605(M) \ Install NIC ControlSet .
2.
The Installation Program will guide you through the subsequent steps. Just
follow the instructions as they appear on the screen. You then have the
option of choosing between different setup types. After completing the
installation, you can start
NIC Control Set immediately.
Uninstallation
Select NIC Control Set from the Start Menu under Settings/Control
Panel/Add-Remove Programs , and select Remove . This operation will delete
all NIC Control Set program files and will remove NIC Control Set from the
Start Menu.