Gigabyte GeForce 6800, User Manual

Page: 9 / 40

Hardware Installation - 7 -
English
You are now ready to proceed with the installation of the graphics card driver. For detailed
instructions, select your operating system from the list below.
To TV or VCR
To Flat Panel Display
4. Locate the AGP slot. If necessary, remove
the metal cover from this slot; then align
your graphics card with the AGP slot, and
press it in firmly until the card is fully
seated.
5. Replace the screw to fasten the card in
place, and replace the computer cover.
6. Plug the display cable into your card; then
turn on the computer and monitor. If your
graphics card came with a DVI-I connector,
you can connect a flat panel display to the
appropriate connector, as shown below...
After installation, please connect the power cable to your
GV-N68128DH graphics card, or the system will not boot.
Please do not touch the graphics card when it is runnnig
to avoid the system unstable problems.
To VGA Monitor