Gigabyte GA-Z77X-UD3H User Manual Download Page 13

Page: 13 / 126

- 12 -

Hardware Installation

Back Panel
Connectors

1 x PS/2 keyboard/mouse port

1 x D-Sub port

1 x DVI-D port

1 x optical S/PDIF Out connector

1 x HDMI port

1 x DisplayPort

2 x eSATA 6Gb/s connectors

6 x USB 3.0/2.0 ports

1 x RJ-45 port

6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out,

Side Speaker Out, Line In/Mic In, Line Out)

I/O Controller

iTE I/O Controller Chip

Hardware
Monitor

System voltage detection

CPU/System temperature detection

CPU/System fan speed detection

CPU overheating warning

CPU/System fan fail warning

CPU/System fan speed control

* Whether the CPU/system fan speed control function is supported will depend on the

CPU/system cooler you install.

BIOS

2 x 64 Mbit lash

Use of licensed AMI EFI BIOS

Support for DualBIOS

™

PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a

Unique Features

Support for @BIOS

Support for Q-Flash

Support for Xpress Install

Support for Xpress Recovery2

Support for EasyTune

* Available functions in EasyTune may differ by motherboard model.

Support for eXtreme Hard Drive (X.H.D)

Support for Auto Green

Support for ON/OFF Charge

Support for Q-Share

Support for

3D Power

Bundled
Software

Norton Internet Security (OEM version)

Intel

Rapid Start Technology

Intel

Smart Connect Technology

Intel

Smart Response Technology

LucidLogix Virtu MVP

* Make sure the monitor cable has been connected to the integrated graphics port on

the back panel.

Operating
System

Support for Microsoft

Windows 7/XP

Form Factor

ATX Form Factor; 30.5cm x 24.4cm

* GIGABYTE reserves the right to make any changes to the product speciications and product-related information without

prior notice.

Summary of Contents for GA-Z77X-UD3H































































































































Search results

Summary of Contents for GA-Z77X-UD3H

Reviews:

Gigabyte GA-Z77X-UD3H, User Manual, Page: 13 / 126

Search results

Summary of Contents for GA-Z77X-UD3H

Reviews: