Gigabyte GA-Z68A-D3H-B3, User Manual

Page: 41 / 104

- 41 - BIOS Setup
Command Rate(CMD)
Options are: Auto (default), 1~3.
>>>>> Channel A/B Misc Timing Control
IO Latency
Options are: Auto (default), 1~31.
Round Trip Latency
Options are: Auto (default), 1~255.

Advanced Voltage Settings
>>> CPU
Load-Line Calibration
Enables or disables Load-Line Calibration. This item allows you to adjust Vdroop at different levels. En-
abling Load-Line Calibration may keep the CPU voltage more constant under light and heavy CPU load.
(Default: Auto)
Standard Disables Load-Line Calibration and sets VDroop following Intel specifications.
Level 1 Enables Load-Line Calibration and slightly adjusts VDroop.
Level 2 Enables Load-Line Calibration and moderately adjusts VDroop.
Note: Enabling Load-Line Calibration may result in damage to your CPU or reduce the useful life of the CPU.
Dynamic Vcore(DVID)
This option is configurable only when CPU Vcore is set to Normal . The default is Auto .
QPI/Vtt Voltage
The default is Auto .
Graphics DVID
The default is Auto .
>>> MCH/ICH
CPU PLL
The default is Auto .
DRAM Voltage
The default is Auto .
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Advanced Voltage Settings
****** Mother Board Voltage Control ******
Voltage Types Normal Current
-----------------------------------------------------------------------------
>>> CPU
Load-Line Calibration [Auto]
Dynamic Vcore(DVID) +0.000V [Auto]
QPI/Vtt Voltage 1.050V [Auto]
Graphics DVID +0.000V [Auto]
>>> MCH/ICH
CPU PLL 1.800V [Auto]
DRAM Voltage 1.500V [Auto]
DRAM Termination 0.750V [Auto]
Ch-A Data VRef. 0.750V [Auto]
Ch-B Data VRef. 0.750V [Auto]
Ch-A Address VRef. 0.750V [Auto]
Ch-B Address VRef. 0.750V [Auto]
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
