Gigabyte GA-P67A-UD5-B3 User Manual Download Page 10

Page: 10 / 116

Hardware Installation

- 10 -

1-2 Product Specifications

CPU

Support for Intel

Core

™

i7 processors/Intel

Core

™

i5 processors/

Intel

Core

™

i3 processors/Intel

Pentium

processors/Intel

Celeron

processors

in the LGA1155 package
(Go to GIGABYTE's website for the latest CPU support list.)
L3 cache varies with CPU

Chipset

Intel

P67 Express Chipset

Memory

4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory

* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than 4 GB.

Dual channel memory architecture

Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules

Support for non-ECC memory modules

Support for Extreme Memory Profile (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Audio

Realtek ALC889 codec

High Definition Audio

2/4/5.1/7.1-channel

Support for Dolby

Home Theater

Support for S/PDIF Out

LAN

1 x Realtek RTL8111E chip (10/100/1000 Mbit)

Expansion Slots

1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x8 (PCIEX8)

* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot

is populated with a PCI Express graphics card, the PCIEX16 slot will operate at

up to x8 mode.

1 x PCI Express x16 slot, running at x4 (PCIEX4)

* The PCIEX4 slot shares bandwidth with the PCIEX1_1 and PCIEX1_2 slots. When

the PCIEX1_1 slot or the PCIEX1_2 slot is populated with an expansion card, the

PCIEX4 slot will operate at up to x1 mode.

2 x PCI Express x1 slots

(All PCI Express slots conform to PCI Express 2.0 standard.)
2 x PCI slots

Multi-Graphics
Technology

Support for 2-Way ATI CrossFireX

™

/NVIDIA SLI technology

(The PCIEX16 and PCIEX8 slots only.)

Storage Interface

Chipset:

- 2 x SATA 6Gb/s connectors (SATA3_0, SATA3_1) supporting up to 2 SATA

6Gb/s devices

- 4 x SATA 3Gb/s connectors (SATA2_2~SATA2_5) supporting up to 4 SATA

3Gb/s devices

- Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10

* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system

performance of the RAID set may vary depending on the devices being connected.

Summary of Contents for GA-P67A-UD5-B3





















































































































Search results

Summary of Contents for GA-P67A-UD5-B3

Reviews:

Brands by name

Popular brands

Gigabyte GA-P67A-UD5-B3, User Manual

Search results

Summary of Contents for GA-P67A-UD5-B3

Reviews:

Brands by name

Popular brands