GA-MA790XT-UD4P Motherboard
- 74 -
B.
Configuring SATA controller mode in BIOS Setup
Make sure to configure the SA TA controller mode correctly in system BIOS Setup .
Step 1:
Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test).
Ensure
OnChip SATA Controller
is enabled under
Integrated Peripherals
. To enable RAID for the
SATA2_0/1/2/3 connectors, set
OnChip SATA Type
to
RAID
. To enable RAID for the SA TA2_4/
SATA2_5 connectors, set
OnChip SATA Type
to
RAID
and set
OnChip SATA Port4/5 Type
to
As
SATA Type
(Figure 1).
The BIOS Setup menus described in this section may differ from the exact settings for your
motherboard. The actual BIOS Setup menu options you will see shall depend on the motherboard
you have and the BIOS version.
Step 2:
Save changes and exit BIOS Setup.
Figure 1
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Integrated Peripherals
OnChip IDE Channel
[Enabled]
OnChip SATA Controller
[Enabled]
OnChip SATA Type
[RAID]
x OnChip SATA Port4/5 Type
[As SATA Type]
Onboard Audio Function
[Enabled]
Onboard GSATA-II Ctrl
[Enabled]
Onboard GSATA-II Ctrl Mode
[IDE]
Onboard LAN Function
[Enabled]
Onboard LAN Boot ROM
[Disabled]
SMART LAN
[Press Enter]
Onboard 1394 Function
[Enabled]
OnChip USB Controller
[Enabled]
USB EHCI Controller
[Enabled]
USB Keyboard Support
[Disabled]
USB Mouse Support
[Disabled]
Legacy USB storage detect
[Enabled]
Onboard Serial Port 1
[3F8/IRQ4]
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level