manualshive.com logo in svg

Gigabyte GA-MA790XT-UD4P, User Manual, Page: 47 / 112

Share
Download
Gigabyte GA-MA790XT-UD4P User Manual Download Page 47

- 47 -

BIOS Setup

2-6

Integrated Peripherals

OnChip IDE Channel

Enables or disables the integrated IDE controller. (Default: Enabled)

OnChip SATA Controller

Enables or disables the integrated SATA controller. (Default: Enabled)

OnChip SATA Type (AMD SB750 South Bridge, SATA2_0~SATA2_3 connectors)

Configures the operating mode of the integrated SATA controller.

Native IDE

Allows the SATA controller to operate in Native IDE mode. (Default)
Enable Native IDE mode if you wish to install operating systems that
support Native mode.

RAID

Enables RAID for the SATA controller.

AHCI

Configures the SATA controller to AHCI mode. Advanced Host Controller
Interface (AHCI) is an interface specification that allows the storage driver to
enable advanced Serial ATA features such as Native Command Queuing
and hot plug.

OnChip SATA Port4/5 Mode (AMD SB750 South Bridge, SATA2_4/SATA2_5 connectors)

This option is configurable only when 

OnChip SATA Type

 is set to 

RAID 

or

 AHCI

. Configures the

operating mode of the integrated SATA2_4/SATA2_5 connectors.

IDE

Disables RAID for the SATA controller and configures the SATA controller to
PATA mode. (Default)

As SATA Type

The mode depends on the 

OnChip SATA Type 

settings.

Onboard Audio Function

Enables or disables the onboard audio function. (Default: Auto)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item
to 

Disabled

.

CMOS Setup Utility-Copyright (C) 1984-2009 Award Software

Integrated Peripherals

OnChip IDE Channel

[Enabled]

OnChip SATA Controller

[Enabled]

OnChip SATA Type

[Native IDE]

x

OnChip SATA Port4/5 Type

[IDE]

Onboard Audio Function

[Enabled]

Onboard GSATA-II Ctrl

[Enabled]

Onboard GSATA-II Ctrl Mode

[IDE]

Onboard LAN Function

[Enabled]

Onboard LAN Boot ROM

[Disabled]

SMART LAN

[Press Enter]

Onboard 1394 Function

[Enabled]

OnChip USB Controller

[Enabled]

USB EHCI Controller

[Enabled]

USB Keyboard Support

[Disabled]

USB Mouse Support

[Disabled]

Legacy USB storage detect

[Enabled]

Onboard Serial Port 1

[3F8/IRQ4]



: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

       F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

Item Help

Menu Level

Summary of Contents for GA-MA790XT-UD4P

















































































































Reviews:

No comments