- 69 -
Appendix
5-1-3 Installing the SATA RAID Driver and Operating System
With the SATA RAID driver diskette and correct BIOS settings, you are ready to install Windows Vista/XP onto
your hard drive(s). The followings are examples of Windows XP and Vista installation.
A. Installing Windows XP
Step 1:
Restart your system to boot from the Windows XP setup disk and press <F6> as soon as you see the mes-
sage "Press F6 if you need to install a 3rd party SCSI or RAID driver" (Figure 1). A screen will then appear
asking you to specify additional device.
Step 2:
The screen displays two drivers, both of which need to be installed. First select
NVIDIA RAID Driver
and
press <Enter>. On the next screen, press <S> to return to the screen in Figure 2. Then select
NVIDIA nForce
Storage Controller
and press <Enter>. When both of the two drivers appear on the confirmation screen,
press <Enter> to continue the driver installation. When completed, proceed with the Windows XP installation.
Windows Setup
Press F6 if you need to install a third party SCSI or RAID driver.
Windows Setup
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
ENTER=Select F3=Exit
Figure 1
Figure 2
NVIDIA RAID Driver (required)
NVIDIA nForce Storage Controller (required)
Step 3:
On the next screen, press <Enter> to continue the driver installation. After the driver installation, you can pro-
ceed with the Windows XP installation.
Summary of Contents for GA-M68M-S2P
Page 2: ...Nov 9 2009 Motherboard GA M68M S2P Motherboard GA M68M S2P Nov 9 2009...
Page 50: ...BIOS Setup 50...
Page 86: ...Appendix 86...
