Gigabyte GA-M68M-S2P, User Manual

Page: 40 / 88

BIOS Setup - 40 -
2-6 Integrated Peripherals
On-Chip IDE Channel
Enables or disables the integrated IDE controller. (Default: Enabled)
NV Serial-ATA Controller
Enables or disables the integrated SATA controller(s). You can select whether to enable all SATA control-
lers or only the first SATA controller. (Default: All Enabled)
IDE Prefetch Mode
Enables or disables prefetch mode for the integrated IDE controller. Enabled activates the IDE prefetch
buffer to enhance hard drive performance. (Default: Enabled)
USB Memory Type
Specifies the type of memory allocated for USB devices. Options are: SHADOW (default), Base Memory
(640K).
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Integrated Peripherals
On-Chip IDE Channel [Enabled]
NV Serial-ATA Controller [All Enabled]
IDE Prefetch Mode [Enabled]
USB Memory Type [SHADOW]

Serial-ATA RAID Config [Press Enter]
Onboard Audio Function [Auto]
On-Chip MAC Lan [Auto]
Onboard LAN Boot ROM [Disabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
x ECP Mode Use DMA 3
On-Chip USB [V1.1+V2.0]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
Legacy USB storage detect [Enabled]
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level

Serial-ATA RAID Config
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Serial-ATA RAID Config
NV SATA RAID function [Disabled]
x NV SATA 1 Primary RAID Enabled
x NV SATA 1 Secondary RAID Enabled
x NV SATA 2 Primary RAID Enabled
x NV SATA 2 Secondary RAID Enabled
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level

NV SATA RAID function
Enables or disables RAID for the integrated SATA 3Gb/s controllers. Enabled allows you to configure
RAID for individual SATA channel. (Default: Disabled)
NV SATA 1 Primary RAID
Enables or disables RAID for the first channel of the first integrated SATA 3Gb/s controller. This item is
configurable only if the
NV SATA RAID function item is set to Enabled. (Default: Enabled)