manualshive.com logo in svg

Gigabyte GA-K8N Pro-SLI, User Manual, Page: 77 / 88

Share
Download
Gigabyte GA-K8N Pro-SLI User Manual Download Page 77

Appendix

- 77 -

English

Press 

Enter

 to view and verify details. The 

Array Detail

 screen appears.

The Array Detail screen shows various information about the array that you selected, such as Striping Block
used, RAID Mode, Striping Width, Disk Model Name, and disk capacity.

Array 2 : NVIDIA MIRROR 111.79G

- Array Detail -

RAID Mode:   Mirroring
Striping Width : 1

Striping Block: 64K

Adapt

Channel

M/S

Index

Disk Model Name

Capacity

2

0

Master

0

ST3120026AS

111.79GB

2

1

Master

1

ST3120026AS

111.79GB

[R] Rebuild      [D] Delete      [C] Clear Disk      [ENTER] Return

If you want to mark this disk as empty and wipe out all its contents, press 

C

.

At the prompt, press 

Y

 to wipe out all the data, otherwise press 

N

.

Press 

Enter

 again to go back to the previous screen and then press 

Ctrl + X

 to exit the RAID setup.

Now that the RAID setup has been configured from the RAID BIOS, the next step is to configure and load
drivers under Windows.

Summary of Contents for GA-K8N Pro-SLI

























































































Reviews:

No comments