manualshive.com logo in svg

Gigabyte GA-K8N Pro-SLI, User Manual, Page: 41 / 88

Share
Download
Gigabyte GA-K8N Pro-SLI User Manual Download Page 41

BIOS Setup

- 41 -

English

On-Chip MAC Lan

Auto

Auto-detect onboard LAN chip function. (Default value)

Disabled

Disable onboard LAN chip function.

On-Chip LAN BOOT ROM

This function decide whether to invoke the boot ROM of the onboard LAN chip.

Enabled

Enable this function. (Default value)

Disabled

Disable this function.

NV IDE/SATA RAID function 

(Note)

Enabled

Enable NV IDE/SATA RAID function.

Disabled

Disable this function. (Default value)

IDE Primary Master RAID

Enabled

Enable 1st master channel IDE RAID function.

Disabled

Disable this function. (Default value)

IDE Primary Slave RAID

Enabled

Enable 1st slave channel IDE RAID function.

Disabled

Disable this function. (Default value)

IDE Secndry Master RAID

Enabled

Enable 2nd master channel IDE RAID function.

Disabled

Disable this function. (Default value)

IDE Secndry Slave RAID

Enabled

Enable 2nd slave channel IDE RAID function.

Disabled

Disable this function. (Default value)

NV Serial-ATA 1

Enabled

Enable Serial ATA 1 supported. (Default value)

Disabled

Disable Serial ATA 1 supported.

NV SATA 1 class code

(Note)

0101

Set NV SATA 1 class code to 0101. (Default value)

0104

Set NV SATA 1 class code to 0104.

NV SATA 1 Primary RAID

Enabled

Enable 1st SATA primary RAID function. (Default value)

Disabled

Disable this function.

NV SATA 1 Secondary RAID

Enabled

Enable 1st SATA secondary RAID function.(Default value)

Disabled

Disable this function.

NV Serial-ATA 2

Enabled

Enable Serial ATA 2 supported. (Default value)

Disabled

Disable Serial ATA 2 supported.

(Note) When using driver version 1.2, please enable "NV IDE/SATA RAID function" if you wish to create

RAID data drive or install O.S. on the RAID drive.
And manually set "NV SATA1/NV SATA 2 class code" from 0101 to 0104.
If your SATA hard drive is connected  to the SATA0 or SATA1 connector , please set  "NV SATA1
class code" to 0104. If your SATA hard drive is connected  to the SATA2 or SATA3 connector ,
please set "NV SATA2 class code" to 0104.

Summary of Contents for GA-K8N Pro-SLI

























































































Reviews:

No comments