- 85 -
Appendix
B. Installing Windows XP
To install Windows XP, you need to install the SATA RAID/AHCI driver during the OS installation. Without the
driver, the hard drive(s) may not be recognized during the Windows setup process. First, copy the driver from
the motherboard driver disk to a floppy disk. Refer to the methods below.
Method A:
•
For the Marvell 88SE9172,
copy all files in the
\BootDrv\Marvell\RAID
folder to your floppy disk.
For AHCI mode, depending on whether you want to install the 32- or 64-bit version,
copy the files in the
AHCI\Win32
or
AHCI\win64
folder.
Method B:
Steps:
1: Use an alternative system and insert the motherboard driver disk.
2: From your optical drive folder, double click the
Menu.exe
file in the
BootDrv
folder. A Command Prompt
window will open similar to that in Figure 2.
3: Insert the blank formatted disk. Select the controller driver by pressing the corresponding letter from the
menu and press <Enter>. For example, from the menu in Figure 2,
•
For the Marvell 88SE9172, select
7) Marvell RAID driver
. (For AHCI drive(s), select
Marvell AHCI
driver
.)
Your system will then automatically copy the driver files to the floppy disk. Press any key to exit when finished.
Figure 2
Summary of Contents for GA-HA65M-D2H-B3
