Gigabyte GA-HA65M-D2H-B3, User Manual

Page: 41 / 104

- 41 - BIOS Setup
Date (mm:dd:yy)
Sets the system date. The date format is week (read-only), month, date and year. Select the desired field
and use the up arrow or down arrow key to set the date.
Time (hh:mm:ss)
Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or
down arrow key to set the time.
IDE Channel 0, 1 Master
IDE Channel 0, 1 Master
Configure your SATA devices by using one of the three methods below:
• None If no SATA devices are used, set this item to None so the system will skip
the detection of the device during the POST for faster system startup.
•
Auto Lets the BIOS automatically detect SATA devices during the POST. (Default)
• Manual Allows you to manually enter the specifications of the hard drive when the hard
drive access mode is set to CHS .
Access Mode Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.
IDE Channel 2, 3 Master, 4 Master/Slave
Extended IDE Drive
Configure your SATA devices by using one of the two methods below:
• Auto Lets the BIOS automatically detect SATA devices during the POST. (Default)
•
None If no SATA devices are used, set this item to None so the system will skip
the detection of the device during the POST for faster system startup.
Access Mode Sets the hard drive access mode. Options are: Auto (default), Large.
The following fields display your hard drive specifications. If you wish to enter the parameters manually,
refer to the information on the hard drive.
2-4 Standard CMOS Features
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Standard CMOS Features
Date (mm:dd:yy) Fri, Jan 7 2011
Time (hh:mm:ss) 22:31:24

IDE Channel 0 Master [None]

IDE Channel 1 Master [None]

IDE Channel 2 Master [None]

IDE Channel 3 Master [None]

IDE Channel 4 Master [None]

IDE Channel 4 Slave [None]
Halt On [All, But Keyboard]
Base Memory 640K
Extended Memory 1022M
Total Memory 1024M
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
