manualshive.com logo in svg

Gigabyte GA-H77N-WIFI, User Manual

Share
Download
Gigabyte GA-H77N-WIFI User Manual Download Page 88

Appendix

- 88 -

Delete RAID Volume

To delete a RAID array, select 

Delete RAID Volume

 in 

MAIN MENU

 and press <Enter>. In the 

DELETE 

VOLUME MENU

 section, use the up or down arrow key to select the array to be deleted and press <Delete>. 

When prompted to confirm your selection (Figure 12), press <Y> to confirm or <N> to abort.

Figure 12

Intel(R) Rapid Storage Technology - Option ROM - 11.1.0.1413

Copyright(C) 2003-12 Intel Corporation.  All Rights Reserved.

Deleting a volume will reset the disks to non-RAID.

WARNING:

  ALL DISK DATA WILL BE DELETED.

(This does not apply to Recovery volumes)

   [

hi

]-Select  

[ESC]-Exit 

[DEL]-Delete Volume

[ HELP ]

[ DELETE VOLUME MENU ]

Name 

Level 

Drives 

Capacity  Status Bootable

Volume0 

RAID0(Stripe) 

    2 

223.6GB 

Normal

 Yes

ALL DATA IN THE VOLUME WILL BE LOST!

(This does not apply to Recovery volumes)

Are you sure you want to delete "Volume0"? (Y/N) :

[

 DELETE VOLUME VERIFICATION

 ]

Acceleration Options

This option allows you to view the status of your accelerated drive/volume (Figure 13) created using the Intel 
IRST utility. In case you are unable to run the Intel IRST utility due to an application error or operating system  
issue, you will need to remove acceleration or manually enable synchronization (Maximized mode only) using  
this option in the RAID ROM utility. 

Steps:
Select 

Acceleration Options

 in 

MAIN MENU

 and press <Enter>. 

To remove the acceleration, select the accelerated drive/volume, press <R>, and press <Y> to confirm.

To synchronize data from the cache device to the accelerated drive/volume, press <S> and press <Y> to confirm.

Figure 13

Intel(R) Rapid Storage Technology - Option ROM - 11.1.0.1413

Copyright(C) 2003-12 Intel Corporation.  All Rights Reserved.

Press 's'  to synchronize data from the cache device to

the Accelerated Disk/Volume

Press 'r' to remove the Disk/Volume Acceleration

WARNING:

  IT IS RECOMMENDED THAT YOU PERFORM A SYNCHRONIZATION

BEFORE REMOVING ACCELERATION

     [

hi

]-Select 

 

[ESC]- Previous Menu 

[ HELP ]

[ ACCELERATION OPTIONS ]

Name  Type 

Capacity Mode  Status 

DISK PORT 3 

Non-RAID Disk 

74.5GB 

Enhanced 

In Sync 

Summary of Contents for GA-H77N-WIFI













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands