Gigabyte GA-H77-DS3H User Manual Download Page 44

Page: 44 / 104

BIOS Setup

- 44 -

CPU Vcore/Dram V3.3V/+12V

Displays the current system voltages.

CPU/System Temperature

Displays current CPU/system temperature.

CPU/System FAN Speed

Displays current CPU/system fan speeds.

CPU Warning Temperature

Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold, BIOS

will emit warning sound. Options are: Disabled (default), 60

C/140

F, 70

C/158

F, 80

C/176

F, 90

C/194

CPU/System Fan Fail Warning

Allows the system to emit warning sound if the CPU fan or system fan are not connected or fail. Check

the fan condition or fan connection when this occurs. (Default: Disabled)

CPU Fan Control mode

Auto

Lets the BIOS automatically detect the type of CPU fan installed and sets the optimal CPU

fan control mode. (Default)

Voltage Sets Voltage mode for a 3-pin CPU fan.

PWM

Sets PWM mode for a 4-pin CPU fan.

Note: The Voltage mode can be set for a 3-pin CPU fan or a 4-pin CPU fan. However, for a 4-pin CPU

fan that is not designed following Intel PWM fan specifications, selecting PWM mode may not effectively

reduce the fan speed.

CPU Fan Speed Control

Allows you to determine whether to enable the CPU fan speed control function and adjust the fan speed.

Normal

Allows the CPU fan to run at different speeds according to the CPU temperature. You can

adjust the fan speed with EasyTune based on your system requirements. (Default)

Silent

Allows the CPU fan to run at slow speeds.

Manual Allows you to control the CPU fan speed under the

Slope PWM

item.

Disabled Allows the CPU fan to run at full speeds.

Slope PWM

Allows you to control the CPU fan speed. This item is configurable only when

CPU Fan Speed Control

set to

Manual

. Options are: 0.75 PWM value /

C ~ 2.50 PWM value /

1st/2nd/3rd System Fan Speed Control

Allows you to determine whether to enable the system fan speed control function and adjust the fan speed.

Normal

Allows the system fans to run at different speeds according to the system temperature. You

can adjust the fan speed with EasyTune based on your system requirements. (Default)

Silent

Allows the system fans to run at slow speeds.

Manual Allows you to control the system fans speed under the

Slope PWM

item.

Disabled Allows the system fans to run at full speeds.

Slope PWM

Allows you to control the system fan speed. This item is configurable only when

1st/2nd/3rd System Fan

Speed Control

is set to

Manual

. Options are: 0.75 PWM value /

C ~ 2.50 PWM value /

Summary of Contents for GA-H77-DS3H









































































































Search results

Summary of Contents for GA-H77-DS3H

Reviews:

Brands by name

Popular brands

Gigabyte GA-H77-DS3H, User Manual

Search results

Summary of Contents for GA-H77-DS3H

Reviews:

Brands by name

Popular brands