Gigabyte GA-H67N-USB3-B3 User Manual Download

Page: 61 / 100

- 61 -

Unique Features

B. Updating the BIOS

When updating the BIOS, choose the location where the BIOS file is saved. The following procedure as

sumes that you save the BIOS file to a USB flash drive.

Step 1:

1. Insert the USB flash drive containing the BIOS file into the computer. In the main menu of Q-Flash, use

the up or down arrow key to select

Update BIOS from Drive

and press <Enter>.

Step 2:

The process of the system reading the BIOS file from the USB flash drive is displayed on the screen. When

the message "Are you sure to update BIOS?" appears, press <Enter> to begin the BIOS update. The monitor
will display the update process.

Step 3:
When the update process is complete, press any key to return to the main menu.

2. Select

HDD 1-0

and press <Enter>.

3. Select the BIOS update file and press <Enter>.

The

•

Save Main BIOS to Drive

option allows you to save the current BIOS file.

Q-Flash only supports USB flash drive or hard drives using FAT32/16/12 file system.

•

If the BIOS update file is saved to a hard drive in RAID/AHCI mode or a hard drive attached to

•

an independent SATA controller, use the <End> key during the POST to access Q-Flash.

Q-Flash Utility v2.19

Flash Type/Size................................. MXIC 25L3206E

Keep DMI Data

Enable

Load CMOS Default

Enable

Update BIOS from Drive

Save BIOS to Drive

Enter : Run

:Move ESC:Reset

F10:Power Off

Q-Flash Utility v2.19

Flash Type/Size................................. MXIC 25L3206E

Keep DMI Data

Enable

Load CMOS Default

Enable

Update BIOS from Drive

Save BIOS to Drive

Enter : Run

:Move ESC:Reset

F10:Power Off

!! Copy BIOS completed - Pass !!

Please press any key to continue

Make sure the BIOS update file matches your motherboard model.

Do not turn off or restart the system when the system is reading/updating the BIOS.

•

Do not remove the USB flash drive or hard drive when the system is updating the BIOS.

•

HDD 1-0

<Drive>

Total size : 0

Free size : 0

0 file(s) found

Summary of Contents for GA-H67N-USB3-B3





































































































Search results

Summary of Contents for GA-H67N-USB3-B3

Reviews:

Related manuals for GA-H67N-USB3-B3

Brands by name

Popular brands

Gigabyte GA-H67N-USB3-B3, User Manual

Search results

Summary of Contents for GA-H67N-USB3-B3

Reviews:

Related manuals for GA-H67N-USB3-B3

Brands by name

Popular brands