GA-G31MX-S2 Motherboard
- 48 -
English
2-9
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster
Robust Graphics Booster (R.G.B.) helps to enhance the performance of the graphics chip and
memory.
Auto
allows the BIOS to automatically set the R.G.B. mode based on system
configurations. Options are: Auto (default), Fast, Turbo.
CPU Clock Ratio
(Note)
Allows you to alter the clock ratio for the installed CPU.
The item is present only if a CPU with unlocked clock ratio is installed.
CPU Host Clock Control
Enables or disables the control of CPU host clock.
Enabled
will allow the
CPU Host Frequency
item below to be configurable. Note: If your system fails to boot after overclocking, please wait for
20 seconds to allow for automated system reboot, or clear the CMOS values to reset the board to
default values. (Default: Disabled)
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster
[Auto]
CPU Clock Ratio
(Note)
[16X]
CPU Host Clock Control
[Disabled]
x CPU Host Frequency (Mhz)
266
PCI Express Frequency (Mhz)
[Auto]
Performance Enhance
[Standard]
System Memory Multiplier (SPD)
[Auto]
Memory Frequency (Mhz) 667
667
High Speed DRAM DLL Settings
[Option 1]
******** System Voltage Optimized ********
System Voltage Control
[Manual]
DDR2 OverVoltage Control
[Normal]
FSB OverVoltage Control
[Normal]
CPU Voltage Control
[Normal]
Normal CPU Vcore
1.4000V
KLJI
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
`
(Note) This item appears only if you install a CPU that supports this feature.
•
Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory
and reduce the useful life of these components. This page is for advanced users only and
we recommend you not to alter the default settings to prevent system instability or other
unexpected results. (Inadequately altering the settings may result in system's failure to
boot. If this occurs, clear the CMOS values and reset the board to default values.)
•
When the
System Voltage Optimized
item blinks in red, it is recommended that you set
the
System Voltage Control
item to
Auto
to optimize the system voltage settings.
Summary of Contents for GA-G31MX-S2
