background image

- 41 -

BIOS Setup

  CPU Host Frequency (Mhz)

 

Allows you to manually set the CPU host frequency. The adjustable range is from 100 MHz to 1200 MHz. 

This item is configurable only if the 

CPU Host Clock Control

 option is enabled.

 

For an 800 MHz FSB CPU, set this item to 200 MHz.

 

For a 1066 MHz FSB CPU, set this item to 266 MHz.

 

For a 1333 MHz FSB CPU, set this item to 333 MHz.

 

For a 1600 MHz FSB CPU, set this item to 400 MHz.

 

Important:

 It is highly recommended that the CPU frequency be set in accordance with the CPU  

specifications.

  PCI Express Frequency (Mhz)

 

Allows you to manually set the PCIe clock frequency. The adjustable range is from 90 MHz to 150 MHz. 

Auto

 sets the PCIe clock frequency to standard 100 MHz. (Default: Auto)

  C.I.A.2

 

CPU Intelligent Accelerator 2 (C.I.A.2) is designed to automatically adjust CPU computing power to 
maximize system performance. C.I.A.2 allows your system bus to be changed dynamically based on 
CPU loading through the use of 5 preset states. 

 

Note: System stability varies, depending on your system hardware components.

 

Disabled   

Disables the use of C.I.A.2. (Default) 

 

Cruise  

 

Increases CPU frequency by 5% or 7% depending on CPU loading.

 

Sports  

 

Increases CPU frequency by 7% or 9% depending on CPU loading.

 

Racing 

 

Increases CPU frequency by 9% or 11% depending on CPU loading.

 

Turbo   

 

Increases CPU frequency by 15% or 17% depending on CPU loading.

 

Full Thrust   

Increases CPU frequency by 17% or 19% depending on CPU loading.

 

Warning:  Before using C.I.A.2, please first verify the overclocking capability of your CPU.  

 

As stability is highly dependent on system components, when system instability occurs after overclock-
ing, lower the overclocking ratio. 

>>>>>   Advanced Clock Control 

  Advanced Clock Control

CMOS Setup Utility-Copyright (C) 1984-2009 Award Software

Advanced Clock Control

higf

: Move 

Enter: Select 

+/-/PU/PD: Value 

F10: Save 

ESC: Exit 

F1: General Help

 

F5: Previous Values 

F6: Fail-Safe Defaults   

F7: Optimized Defaults

Item Help

Menu Level

 

  CPU Clock Drive 

 

 

[800mV]

  PCI Express Clock Drive 

 

[900mV]

  CPU Clock Skew  

 

 

[       0ps]

  MCH Clock Skew 

 

 

[       0ps]

Summary of Contents for GA-EP45T-USB3P

































































































































Reviews: