manualshive.com logo in svg

Gigabyte GA-EP45T-DS3, User Manual, Page: 5 / 116

Share
Download
Gigabyte GA-EP45T-DS3 User Manual Download Page 5

- 5 -

Chapter 3 Drivers Installation ...................................................................................... 63

3-1

Installing Chipset Drivers ............................................................................... 63

3-2

Application Software ....................................................................................... 64

3-3

Technical Manuals .......................................................................................... 64

3-4

Contact........................................................................................................... 65

3-5

System........................................................................................................... 65

3-6

Download Center ............................................................................................ 66

Chapter 4 Unique Features ......................................................................................... 67

4-1

Xpress Recovery2 ......................................................................................... 67

4-2

BIOS Update Utilities ..................................................................................... 72

4-2-1

Updating the BIOS with the Q-Flash Utility ...................................................... 72

4-2-2

Updating the BIOS with the @BIOS Utility ....................................................... 75

4-3

EasyTune 6 .................................................................................................... 76

4-4

Dynamic Energy Saver Advanced ................................................................ 77

4-5

Ultra TPM    

(Note)

.......................................................................................... 79

4-6

Q-Share ......................................................................................................... 80

4-7

Time Repair .................................................................................................... 81

4-8

Teaming .......................................................................................................... 82

Chapter 5 Appendix .................................................................................................... 85

5-1

Configuring SATA Hard Drive(s)  ................................................................ 85

5-1-1

Configuring the Onboard SATA Controller ......................................................... 85

5-1-2

Making a SATA RAID/AHCI Driver Diskette ..................................................... 91

5-1-3

Installing the SATA RAID/AHCI Driver and Operating System ...................... 93

5-2

Configuring Audio Input and Output ................................................................. 98

5-2-1

Configuring 2/4/5.1/7.1-Channel Audio ............................................................ 98

5-2-2

Installing the S/PDIF In Cable (Optional) ......................................................... 100

5-2-3

Enabling the Dolby Home Theater Function  ............................................. 102

5-2-4

Configuring Microphone Recording ................................................................. 103

5-2-5

Using the Sound Recorder ............................................................................... 105

5-3

Troubleshooting ............................................................................................. 106

5-3-1

Frequently Asked Questions ........................................................................... 106

5-3-2

Troubleshooting Procedure .............................................................................. 107

Regulatory Statements ............................................................................................... 109

 Only for GA-EP45T-DS3R.

(Note) This feature is optional due to different regional policy.

Summary of Contents for GA-EP45T-DS3





















































































































Reviews:

No comments