background image

Copyright

©

 2014 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by 

any means without GIGABYTE's prior written permission.

 

„

In order to assist in the use of this product, carefully read the User's Manual.

 

„

For product-related information, check on our website at: http://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0" means the 

revision of the motherboard is 1.0. Check your motherboard revision before updating motherboard BIOS, 

drivers, or when looking for technical information.

Example:

Motherboard

GA-C1037UN-LA

Mar. 17, 2014

Mar. 17, 2014

Motherboard
GA-C1037UN-LA

Summary of Contents for GA-C1037UN-LA

































Reviews: