background image

GA-8SRX Motherboard

2 4

Integrated Peripherals

This setup page includes all onboard peripherals.

Power Management Setup

This setup page includes all the items of Green function features.

PnP/PCI Configurations

This setup page includes all the configurations of PCI & PnP ISA resources.

PC Health Status

This setup page is the System auto detect Temperature, voltage, fan, speed.

Frequency/Voltage Control

This setup page is control CPU’s clock and frequency ratio.

Load Fail-Safe Defaults

Fail-Safe Defaults indicates the value of the system parameters which the system would

be in safe configuration.

Load Optimized Defaults

Optimized Defaults indicates the value of the system parameters which the system would

be in best performance configuration.

Set Supervisor password

Change, set, or disable password. It allows you to limit access to the system and Setup,

or just to Setup.

Set User password

Change, set, or disable password. It allows you to limit access to the system.

Save & Exit Setup

Save CMOS value settings to CMOS and exit setup.

Exit Without Saving

Abandon all CMOS value changes and exit setup.

Summary of Contents for GA-8SRX









































































































Reviews: