BIOS Setup
3 5
(Default Value)
Disabled
Disable this function.
Share Memory Size
4MB/8MB/16MB/32MB/64MB Set onchip VGA shared memory size.(Default Value:32MB)
USB Controller
Disable this option if you are not using the onboard USB feature.
Enabled
Enable USB Controller. (Default value)
Disabled
Disable USB Controller.
USB Legacy Support
Enabled
Enable USB Legacy Support.
Disabled
Disable this function.(Default Value)
Onboard Lan
Disabled
Disable this function.
Enabled
Enable Onboard Lan Chip function. (Default Value)
Init Display First
This feature allows you to select the first initation of the monitor display from which card, when you
install an AGP VGA card and a PCI VGA card on board.
PCI
Set Init Display First to PCI Slot.
AGP
Set Init Display First to AGP. (Default value)
OnBoard FDC
When enabled, the fioppy diskette drive (FDD) controller is activated.
Disabled
Disable this function.
Enabled
Enable on board floppy disk controller.(Default value)
Onboard Serial Port A
Auto
BIOS will automatically setup the port A address.
3F8/IRQ4
Enable onboard Serial port A and using daddress 3F8 , IRQ4. (Default Value)