manualshive.com logo in svg

Gigabyte GA-8SIML, User Manual, Page: 37 / 75

Share
Download
Gigabyte GA-8SIML User Manual Download Page 37

GA-8SIML Motherboard

3 4

IDE1 Conductor Cable

Auto

Will be automatically detected by BIOS. (Default Value)

ATA66/100

Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device
and cable is compatible with ATA66/100).

ATA33

Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and
cable is compatible with ATA33).

IDE2 Conductor Cable

Auto

Will be automatically detected by BIOS. (Default Value)

ATA66/100

Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE device
and cable is compatible with ATA66/100).

ATA33

Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and
cable is compatible with ATA33).

 On-Chip Primary PCI IDE

When enabled, allows you to use the onboard primary PCI IDE.

Enabled

Enable onboard 1st channel IDE port. (Default value)

Disabled

Disable onboard 1st channel IDE port.

 On-Chip Secondary PCI IDE

When enabled, allows you to use the onboard secondary PCI IDE.

Enabled

Enable onboard 2nd channel IDE port. (Default value)

Disabled

Disable onboard 2nd channel IDE port.

AC97 Audio

Enabled

Enable onboard AC'97 audio function. (Default Value)

Disabled

Disable this function.

AC97 Modem

Enabled

BIOS will search MC97 Codec (AMR Modem Card). If found, MC97 function

will be enabled. If no MC97 Codec found, MC97 function will be disabled.

Summary of Contents for GA-8SIML












































































Reviews:

No comments