Gigabyte GA-8I945PLGE-RH User Manual Download Page 37

Page: 37 / 80

BIOS Setup

- 37 -

English

USB Controller

Enabled

Enable USB Controller. (Default value)

Disabled

Disable USB Controller.

USB 2.0 Controller

Disable this function if you are not using onboard USB 2.0 feature.

Enabled

Enable USB 2.0 Controller. (Default value)

Disabled

Disable USB 2.0 Controller.

USB Keyboard Support

Enabled

Enable USB Keyboard Support.

Disabled

Disable USB Keyboard Support. (Default value)

USB Mouse Support

Enabled

Enable USB Mouse Support.

Disabled

Disable USB Mouse Support. (Default value)

Legacy USB storage detect

Enabled

Enable USB storage detection function in MS-DOS environment. (Default
value)

Disabled

Disable this function.

Azalia Codec

Auto

Auto detect Azalia audio function. (Default value)

Disabled

Disable Azalia audio function.

Onboard H/W LAN

Enabled

Enable Onboard H/W LAN function. (Default value)

Disabled

Disable this function.

OnBoard LAN Boot ROM

This function decide whether to invoke the boot ROM of the onboard LAN chip.

Enabled

Enable this function.

Disabled

Disable this function. (Default value)

Onboard Serial Port 1

Auto

BIOS will automatically setup the port 1 address.

3F8/IRQ4

Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value)

2F8/IRQ3

Enable onboard Serial port 1 and address is 2F8/IRQ3.

3E8/IRQ4

Enable onboard Serial port 1 and address is 3E8/IRQ4.

2E8/IRQ3

Enable onboard Serial port 1 and address is 2E8/IRQ3.

i-Lock

Enabled

Enable the i-Lock function. (Default value)

Disabled

Disable this function.

Onboard Parallel port

Disabled

Disable onboard LPT port.

378/IRQ7

Enable onboard LPT port and address is 378/IRQ7. (Default value)

278/IRQ5

Enable onboard LPT port and address is 278/IRQ5.

3BC/IRQ7

Enable onboard LPT port and address is 3BC/IRQ7.

Summary of Contents for GA-8I945PLGE-RH

















































































Search results

Summary of Contents for GA-8I945PLGE-RH

Reviews:

Related manuals for GA-8I945PLGE-RH

Brands by name

Popular brands

Gigabyte GA-8I945PLGE-RH, User Manual

Search results

Summary of Contents for GA-8I945PLGE-RH

Reviews:

Related manuals for GA-8I945PLGE-RH

Brands by name

Popular brands