background image

GA-8I945GME Motherboard

- 10 -

English

1-2

Feature Summary

CPU

Š

Supports LGA775 Intel

®

 Pentium

®

 4 Processor

 (Note 1)

Š

L2 cache varies with CPU

Front Side Bus

Š

Supports 1066/800/533MHz FSB

Chipset

Š

Northbridge: Intel 945G Chipset

Š

Southbridge: Intel ICH7

LAN

Š

Onboard Realtek RTL8110S chip (10/100/1000 Mbit)

Audio

Š

Onboard Realtek ALC655 chip

Š

Supports 2 / 4 / 6 channel audio

Š

Supports SPDIF In/Out connection

Storage

Š

ICH7 Southbridge
-

1 FDD connector, allowing connection of 2 FDD devices

-

1 IDE connectors (IDE1) with UDMA 33/ATA 66/ATA 100 suppport,
allowing connection of 2 IDE devices

-

4 SATAII connectors (SATAII0,SATAII1,SATAII2,SATAII3), allowing
connection of 4 SATA devices

O.S Support

Š

Microsoft Windows 2000/XP

Memory

Š

2 DDR II DIMM memory slots (supports up to 2GB memory)

Š

Supports DDR II 667

(Note 2)

/533/400 unbuffered DIMMs

Š

Supports 1.8V DDR II DIMMs

Expanstion Slots

Š

1 PCIEx16 slot

Š

3 PCI slots

Internal Connectors

Š

1 20-pin ATX power connector

Š

1 4-pin ATX 12V power connector

Š

1 floppy connector

Š

1 IDE connector

Š

4 SATAII connectors

Š

1 CPU fan connector

Š

1 system fan connector

Š

1 front panel connector

Š

1 front audio connector

Š

1 CD In connector

Š

1 AUX In connector

Š

1 COMB connector

Š

2 USB 2.0/1.1 connectors for additional 4 USB 2.0/1.1 ports by cables

Š

1 SUR_CEN connector

Š

1 SPDIF In/Out connector

Š

1 power LED connector

Š

1 TPM connector

Summary of Contents for GA-8I945GME

















































































Reviews: