TYAN S2932 Manual Download | Manualshive

Page: 1 / 94

background image

1

Thunder n3600M

///

S2932

Version 1.1

Copyright

Copyright © TYAN Computer Corporation, 2007. All rights reserved. No part of
this manual may be reproduced or translated without prior written consent from
TYAN Computer Corp.

Trademark

All registered and unregistered trademarks and company names contained in
this manual are property of their respective owners including, but not limited to
the following.

TYAN, Thunder n3600M are trademarks of TYAN Computer Corporation.
AMD, Opteron, and combinations thereof are trademarks of AMD Corporation.
AMI, AMI BIOS are trademarks of AMI Technologies.
Microsoft, Windows are trademarks of Microsoft Corporation.
Marvell

®

is a trademark of Broadcom Corporation and/or its subsidiaries.

nVIDIA, nForce are trademarks of NVIDIA Corporation.

Notice

Information contained in this document is furnished by TYAN Computer
Corporation and has been reviewed for accuracy and reliability prior to printing.
TYAN assumes no liability whatsoever, and disclaims any express or implied
warranty, relating to sale and/or use of TYAN products including liability or
warranties relating to fitness for a particular purpose or merchantability. TYAN
retains the right to make changes to product descriptions and/or specifications
at any time, without notice. In no event will TYAN be held liable for any direct or
indirect, incidental or consequential damage, loss of use, loss of data or other
malady resulting from errors or inaccuracies of information contained in this
document.

1
2
3
...
»

Summary of Contents for S2932































































































Reviews:

No comments

Related manuals for S2932

Brand: Danbit Pages: 70

Brand: QDI Pages: 69

Brand: Hailo Pages: 22

Brand: Yamaha Pages: 90

Brand: TYAN Pages: 67

Z270 Gaming Pro Carbon Motherboard

Brand: MSI Pages: 92

Brand: JETWAY Pages: 48

Brand: QDI Pages: 85

Brand: Linear Technology Pages: 10

Brand: MSI Pages: 112

K8N Neo3 MS-7135

Brand: MSI Pages: 124

Brand: ISSC Pages: 39

Brand: BCM Pages: 93

Brand: Gigabyte Pages: 37

Brand: MSI Pages: 85

Brand: IWILL Pages: 48

Brand: Supermicro Pages: 93

Brand: HONDA marine Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands