Gigabyte GA-8I915ME Series Page 51 User Manual Download | Manualshive

Page: 51 / 80

background image

Install Drivers

- 51 -

English

Chapter 3 Install Drivers

Pictures below are shown in Windows XP.
Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the driver
CD-title will auto start and show the installation guide. If not, please double click the CD-ROM
device icon in "My computer", and execute the Run.exe.

3-1

Install Chipset Drivers

After insert the driver CD, "Xpress Install" will scan automatically the system and then list all the drivers that
recommended to install. Please pick the item that you want and press "install" followed the item; or you can
press "Xpress Install" to install all items defaulted.

Some device drivers will restart your system automatically. After restarting
your system the "Xpress Install" will continue to install other drivers.
System will reboot automatically after install the drivers, afterward you can
install others application.

For USB2.0 driver support under Windows XP operating system, please
use Windows Service Pack. After install Windows Service Pack, it will show
a question mark "?" in "Universal Serial Bus controller" under "Device
Manager". Please remove the question mark and restart the system (System
will auto-detect the right USB2.0 driver).

«
...
49
50
51
52
53
...
»

Summary of Contents for GA-8I915ME Series

















































































Reviews:

No comments

Related manuals for GA-8I915ME Series

Brand: IEI Technology Pages: 177

Brand: PC Partner Pages: 20

Pentium P5I430TX/IIB TITANIUM IIB

Brand: QDI Pages: 53

CVN X570 GAMING PRO V14

Brand: Colorful Pages: 64

Brand: ECS Pages: 46

Brand: Supero Pages: 80

Brand: Intel Pages: 12

Brand: Advantech Pages: 116

Brand: BESTEK Pages: 45

Brand: Fujitsu Siemens Computers Pages: 20

Brand: IWILL Pages: 48

H55M-LE - - 01-2010

Brand: ASROCK Pages: 181

Brand: Gigabyte Pages: 31

Brand: IWILL Pages: 54

Brand: JETWAY Pages: 55

Brand: Gigabyte Pages: 72

Brand: Gigabyte Pages: 96

Brand: Infineon Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands