BIOS Configuration
4-9
•
Processor Number Feature
This item will show up when you install the Pentium III processor.
The default value is Enabled.
Enabled
Enable Processor Number Feature.
Disabled
Disable Processor Number Feature.
•
Boot From LAN First
The default value is Disabled.
Enabled
Enabled Boot From LAN First.
Disabled
Disabled Boot From LAN First.
Auto
Boot From LAN First set to Auto.
☞
You can set “Auto” or “Enabled” to boot from LAN first.
•
Boot Sequence
This category determines which drive computer searches first for the disk
operating system (i.e., DOS). Default value is A, C, SCSI.
X1, X2, X3
System will first search for X1 disk drive then X2 disk drive
and then X3 disk drive.
•
VGA Boot From
The default value is AGP.
AGP
VGA Boot From AGP.
PCI Slot
VGA Boot From PCI Slot.
•
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80
tracks. 360
K type is 40 tracks 720
K, 1.2
M and 1.44
M are all 80 tracks.
The default value is Enabled.
Enabled
BIOS searches for floppy disk drive to determine it is 40 or
80 tracks. Note that BIOS can not tell from 720
K, 1.2
M or
1.44
M drive type as they are all 80 tracks
Disabled
BIOS will not search for the type of floppy disk drive by track
number. Note that there will not be any warning message if
the drive installed is 360
K
