Gigabyte GA-6RX, User Manual

Page: 114 / 146

BIOS Setup
106
•
OnBoard MC’97 Modem
Auto BIOS will search MC97 Codec (AMR Modem Card). If found, MC97
function will be enabled. If no MC97 Codec found, MC97 function will
be disabled. (Default Value)
Disabled Disable this function.
•
OnBoard Creative Sound
Enabled Enable OnBoard Creative Sound function. (Default Value)
Disabled Disable this function.
•
OnBoard FDC
Disabled Disable this function.
Enabled Enable on board floppy disk controller.
Auto Set the floppy disk controller automatically. (Default Value)
•
OnBoard Serial Port 1
Auto BIOS will automatically setup the port 1 address. (Default Value)
3F8/COM1 Enable OnBoard Serial port 1 and address is 3F8.
2F8/COM2 Enable OnBoard Serial port 1 and address is 2F8.
3E8/COM3 Enable OnBoard Serial port 1 and address is 3E8.
2E8/COM4 Enable OnBoard Serial port 1 and address is 2E8.
Disabled Disable OnBoard Serial port 1.
•
OnBoard Serial Port 2
Auto BIOS will automatically setup the port 2 address. (Default Value)
3F8/COM1 Enable OnBoard Serial port 2 and address is 3F8.
2F8/COM2 Enable OnBoard Serial port 2 and address is 2F8.
3E8/COM3 Enable OnBoard Serial port 2 and address is 3E8.
2E8/COM4 Enable OnBoard Serial port 2 and address is 2E8.
Disabled Disable OnBoard Serial port 2.
•
Serial Port 2 Mode
(This item allows you to determine which Serial Port B Mode of onboard I/O chip)
Normal Set onboard I/O chip Serial Port B to Normal Mode. (Default Value)
IrDA Set onboard I/O chip Serial Port B to IrDA Mode.
ASKIR Set onboard I/O chip Serial Port B to ASKIR Mode.
SCR Set onboard I/O chip Serial Port B to Smart Card Reader.