Gigabyte GA-6RX, User Manual

Page: 104 / 146

BIOS Setup
96
••••
DDR CAS# Latency
2 Cycles Set DDR CAS# Latency to 2 Cycles.
2.5 Cycles Set DDR CAS# Latency to 2.5 Cycles.
••••
DDR Bank Interleave
4-WAY Set DDR Bank Interleave to 4-WAY.
2-WAY Set DDR Bank Interleave to 2-WAY.
Disabled Disable this function.
••••
DDR Command Rate
If you wish to maximize the performance of your DDR, set “DDR Command Rate” as “1T
Command” and set “Top Performance” as “Enabled”. Please note, enabling this function
may cause your system to become unstable. For power End-User use only.
2T Command Set DDR Command Rate to 2T Command. (Default Value)
1T Command Set DDR Command Rate to 1T Command.
••••
AGP Mode
4X Set AGP Mode to 4X (Only if the AGP Card support 4X Rate).
(Default Value)
1X Set AGP Mode to 1X.
2X Set AGP Mode to 2X.
••••
AGP Read Synchronization
Enabled Enable AGP Read Synchronization. (Default Value)
Disabled Disable AGP Read Synchronization.
••••
AGP Fast Write
Enabled Enable this function only if the AGP Card support Fast Write Function.
(Enable this function can increase AGP performance).
Disabled Disable this function. (Default Value)
••••
AGP Comp. Driving
Auto Set AGP Comp. Driving to Auto. (Default Value)
Manual Set AGP Comp. Driving to Manual.
If AGP Comp. Driving is Manual.
Manual AGP Comp. Driving: 00~FF