BIOS Setup
- 93 -
5-3-3-1-1
DRAM Controller Configuration
Parameter
Description
DRAM Controller Configuration
DRAM Power Options
Press [Enter] to configure DRAM Power Options.
Power Down Enable
– Enable/Disable DDR power down mode.
– Options available: Auto, Enabled, Disabled. Default setting is
Auto
.
Power Down Entry Delay
–
Specifies the value.
SubUrgRefLowerBound
–
Specifies the value. Valid value: 6~1.
UrgRefLimit
–
Specifies the value. Valid value: 6~1.
DRAM Maximum Activate Count
– Options available: Untested MAC, 700K, 600K, 500K, 400K, 300K,
200K, Unlimited MAC, Auto. Default setting is
Auto
.
DRAM Refresh Rate
– Options available: 7.8 usec, 3.9 usec. Default setting is
Auto
.
Self-Refresh Exit Staggering
– Options available: Disabled, Trfc/3, Trfc/4. Default setting is
Disabled
.
Cmd2T
Selects the Cmd2T mode on ADDR/CMD.
Options available: Auto, 1T, 2T. Default setting is
Auto
.
Gear Down Mode
Enable/Disable the Gear Down Mode function.
Options available: Auto, Enabled, Disabled. Default setting is
Auto
.
Summary of Contents for G492-ZL2
Page 1: ...G492 ZL2 HPC Server 4U DP SXM4 A100 8 GPU Server User Manual Rev 1 0 ...
Page 51: ...BIOS Setup 51 When Boot Mode Select is set to Legacy in the Boot Boot Mode Select section ...
Page 63: ...BIOS Setup 63 5 2 8 PCI Subsystem Settings ...
Page 74: ... 74 BIOS Setup 5 2 17 Intel R X710 Ethernet Controller ...