Gigabyte G492-HA0 User Manual Download Page 92

Page: 92 / 110

BIOS Setup

- 92 -

Parameter

Description

PCIe Error Enabling

Press [Enter] to configure advanced items.

PCIE Error

– Enable/Disable PCIE error.

– Options available: Enable, Disable. Default setting is

Disable

Uncorrected Error

(Note)

– Enables and escalates Uncorrectable/Recoverable Errors to error pins.

– Options available: Enable, Disable. Default setting is

Enable

Fatal Error Enable

(Note)

– Enables and escalates Fatal Errors to error pins.

– Options available: Enable, Disable. Default setting is

Enable

Assert NMI on SERR

(Note)

– Enable/Disable BIOS generates a non-maskable interrupt (NMI) and logs

an error when a system error (SERR) occurs.

– Options available: Enable, Disable. Default setting is

Enable

Assert NMI on PERR

(Note)

– Enable/Disable BIOS generates a non-maskable interrupt (NMI) and logs

an error when a processor bus parity error (PERR) occurs.

– Options available: Enable, Disable. Default setting is

Enable

(Note) This item appears when

PCIE Error

is set to

Enable

Summary of Contents for G492-HA0















































































































Search results

Summary of Contents for G492-HA0

Reviews:

Gigabyte G492-HA0, User Manual, Page: 92 / 110

Search results

Summary of Contents for G492-HA0

Reviews: