manualshive.com logo in svg

Gigabyte G482-Z54, User Manual

Share
Download
Gigabyte G482-Z54 User Manual Download Page 124

BIOS Setup

- 124 -

5-6-1  System Event Log

Parameter

Description

Enabling / Disabling Options

SEL Components

Change this item to enable or disable all features of System Event 
Logging during boot.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Erasing Settings

Erase SEL

Choose options for erasing SEL.
Options available: No/Yes, On next reset/Yes, On every reset. Default 
setting is 

No

.

When SEL is Full

Choose options for reactions to a full SEL.
Options available: Do Nothing/Erase Immediately. Default setting is 

Do 

Nothing

.

Custom EFI Logging Options

Log EFI Status Codes

Enable/Disable the logging of EFI Status Codes (if not already converted 
to legacy).
Options available: Disabled, Both, Error code and Progress code. Default 
setting is 

Error code

.

Summary of Contents for G482-Z54































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands