manualshive.com logo in svg

Gigabyte G482-Z54, User Manual

Share
Download
Gigabyte G482-Z54 User Manual Download Page 106

BIOS Setup

- 106 -

Parameter

Description

Hot Plug Handling mode

Controls the Hot Plug Handling mode.
Options available: Auto, A0 Mode, OS First (No Error Handling), 
OS First (Error Handling-Not Implemented), Firmware First (Not Implemented).
Default setting is 

Auto

.

Presence Detect Select 
mode

Controls the Presence Detect Select mode.
Options available: Auto, OR, AND. Default setting is 

Auto

.

Preferred IO Device

Configures Preferred IO Device.

Options available: Auto, Manual. Default setting is 

Auto

.

Loopback Mode

Enabled/Disabled PCIe Loopback mode.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

CV test

Set this to Enabled to support running PCIECV tool. 
Auto: preserve hardware defaults.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

Summary of Contents for G482-Z54































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands