manualshive.com logo in svg

Gigabyte G481-S80, User Manual, Page: 87 / 124

Share
Download
Gigabyte G481-S80 User Manual Download Page 87

- 87 -

BIOS Setup

Parameter

Description

Interleave NVDIMMs

Controls if NVDIMMs are interleaved together or not.
Options available: Enable/Disable. Default setting is 

Disable

.

Assert ADR on Reset

Enable/Disable Assert ADR on Reset.
Options available: Enable/Disable. Default setting is 

Disable

.

Assert ADR on S5

Enable/Disable Assert ADR on S5.
Options available: Enable/Disable. Default setting is 

Disable

.

Memory Topology

Press [Enter] to configure advanced items.

Memory Map

Press [Enter] to configure advanced items.

 

Š

IMC Interleaving

 

–

Select to configure IMC Interleaving.

 

– Options available: Auto/1-way Interleave/2-way Interlave. 

Default setting is 

Auto

.

Memory RAS Configuration

Press [Enter] to configure advanced items.

 

Š

RAS Type

 

– Displays the RAS type.

 

Š

Static Virtual Lockstep Mode

 

– Enable/Disable the Static Virtual Lockstep mode.

 

– Options available: Disable/Enable. Default setting is 

Disable

.

 

Š

Mirror Mode

 

– Mirror Mode will set entire 1LM/2LM memory in system to be 

mirrored, consequently reducing the memory capacity by half. 
Enables the Mirror Mode will disable the XPT Prefetch. 

 

– Options available: Disable/Mirror Mode 1LM/Mirror Mode 2LM. 

Default setting is 

Disable

.

 

Š

Memory Rank Sparing

 

– Enable/Disable Memory Rank Sparing.

 

– Options available: Disable/Enable. Default setting is 

Disable

.

 

Š

Correctable Error Threshold

 

– Correctable Error Threshold (1-32767) used for sparing, 

tagging, and leaky bucket.

 

– Press the <+> / <-> keys to increase or decrease the desired 

values.

 

Š

SDDC Plus One

 

– Enable/Disable SDDC Plus One.

 

– Options available: Disable/Enable. Default setting is 

Disable

.

Summary of Contents for G481-S80





























































































































Reviews:

No comments