Gigabyte G292-Z46 User Manual Download Page 46

Page: 46 / 151

System Hardware Installation

- 46 -

3-9 Replacing the Power Supply

Follow these instructions to replace the power supply:

1. Pull up the power supply handle and press the retaining clip on the right side of the power supply

along the direction of the arrow.

2. At the same time, pull out the power supply using the handle.

Insert the replacement power supply firmly into the chassis. Connect the AC power cord to the

replacement power supply.

CAUTION!

• Please see the illustration below for installation sequence.

Primary PSU

(PSU1)

Secondary PSU

(PSU2)

CAUTION!

• In order to reduce the risk of injury from electric shock, disconnect AC power from the power

supply before removing it from the system.

Summary of Contents for G292-Z46
























































































































































Search results

Summary of Contents for G292-Z46

Reviews:

Related manuals for G292-Z46

Brands by name

Popular brands

Gigabyte G292-Z46, User Manual

Search results

Summary of Contents for G292-Z46

Reviews:

Related manuals for G292-Z46

Brands by name

Popular brands