Gigabyte G262-ZL0 User Manual Download Page 84

Page: 84 / 141

BIOS Setup

- 84 -

Parameter

Description

PPIN Opt-in

Enable/Disable the PPIN feature.
Options available: Auto, Enabled, Disabled. Default setting is

Auto

SNP Memory (RMP Table)
Coverage

Enabled: Enter system memory is covered.
Options available: Auto, Enabled, Disabled, Custom.
Default setting is

Auto

SMEE

Control secure memory encryption enable.
Options available: Auto, Enabled, Disabled.
Default setting is

Auto

Action on BIST Failure

Action to take when a CCD BIST failure is detected.
Options available: Auto, Do nothing, Down-CCD.
Default setting is

Auto

Fast Short REP MOVSB

Default is 1, cab be set to zero for analysis purpose as long as OS supports
it.
Options available: Enabled, Disabled.
Default setting is

Enabled

Enhanced REP MOVSB/
STOSB

Default is 1, cab be set to zero for analysis purpose as long as OS supports
it.
Options available: Enabled, Disabled.
Default setting is

Enabled

REP-MOV/STOS Steaming

Allows REP-MOV/STOS to use non-caching streaming stores for large
sizes.
Options available: Enabled, Disabled.
Default setting is

Enabled

X3D

Override of X3D technology.
Options available: Auto, Disable, 1 stack, 2 stack, 4 stack.
Default setting is

Auto

IBS hardware work around

Set if using IBS execution sampling without software workaround for
erratum 1,285. May impac performance..
Options available: Enabled, Auto.
Default setting is

Enabled

Summary of Contents for G262-ZL0














































































































































Search results

Summary of Contents for G262-ZL0

Reviews:

Related manuals for G262-ZL0

Brands by name

Popular brands

Gigabyte G262-ZL0, User Manual

Search results

Summary of Contents for G262-ZL0

Reviews:

Related manuals for G262-ZL0

Brands by name

Popular brands