manualshive.com logo in svg

Gigabyte E263-Z30, User Manual, Page: 63 / 157

Share
Download
Gigabyte E263-Z30 User Manual Download Page 63

BIOS Setup

- 63 -

5-2-8 

USB Configuration

(Note)  This item is present only if you attach USB devices.

Parameter

Description

USB Configuration

USB Module Version

Displays the USB module version information.

USB Controllers

Displays the supported USB controllers.

USB Devices:

Displays the USB devices connected to the system.

Legacy USB Support

Enable/Disable the Legacy USB support function. AUTO option disables 
legacy support if no USB devices are connected. DISABLE option will keep 
USB devices available only for EFI applications.
Options available: Enabled, Disabled, Auto. Default setting is 

Enabled

.

XHCI Hand-off

Enable/Disable the XHCI Hand-off support. 
Options available: Enabled, Disabled. Default setting is 

Enabled

.

USB Mass Storage Driver 
Support

(Note)

Enable/Disable the USB Mass Storage Driver Support.
Options available: Disabled, Enabled. Default setting is 

Enabled

.

USB hardware delays and 
time-outs

USB transfer time-out

Selects the time-out value for USB Control/Bulk/Interrupt transfers.
Options available: 1 sec, 5 sec, 10 sec, 20 sec.
Default setting is 

20 sec

.

Summary of Contents for E263-Z30






























































































































































Reviews:

No comments