manualshive.com logo in svg

Gigabyte E263-Z30, User Manual, Page: 115 / 157

Share
Download
Gigabyte E263-Z30 User Manual Download Page 115

BIOS Setup

- 115 -

Parameter

Description

Data Link Feature Cap

Enable/Disable the data link feature capability.
Options available: Enabled, Disabled, Auto. Default setting is 

Auto

.

CV test

Enable/Disable the running PCIE CV tool support.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

SEV-SNP Support

Enable/Disable the SEV-SNP support.
Options available: Disable, Enable. Default setting is 

Disable

.

Allow Compliance

When enabled, allows the PCIe RP to enter Polling.Compliance state.
Options available: Auto, Disable, Enable. Default setting is 

Auto

.

SRIS

Options available: Auto, Disable, Enable. Default setting is 

Auto

.

Multi Upstream Auto 
Speed Change

Defines the setting of this feature for all PCIe devices.

Options available: Disabled, Enabled, Auto. Default setting is 

Auto

.

Multi Auto Speed Change 
On Last Rate

Options available: Disable, Enable, Auto. Default setting is 

Auto

.

PCIE Link Speed 
Capability

Options available: Maximum speed, Gen1, Gen2, Gen3, Gen4, Gen5, Auto. 
Default setting is 

Auto

.

RTM Margining Support

Options available: Disable, Enable, Auto. Default setting is 

Auto

.

EQ Bypass To Highest 
Rate

Options available: Disable, Enable, Auto. Default setting is 

Auto

.

nBif Common Options

Press [Enter] for configuration of advanced items.

Summary of Contents for E263-Z30






























































































































































Reviews:

No comments