4
2-3. Connection for Ethernet User
Step 1. Please prepare an Ethernet cable (RJ- 45) first.
Step 2. Connect the Ethernet cable to the WAN port of the GN-BR401.
Step 3. Connect an end of the network cable to the ADSL/Cable Modem of the Ethernet
connection port.
Note: Please check if the light of the WAN port of the GN-BR401is lit. If not, try to use
the cross over (RJ- 45) Ethernet cable that comes with this product.
Step 4. Connect any port of the area network LAN1, 2, 3, & 4 of the GN-BR401 to your PC.
Step 5. Connect the adapter to the power connection slot of the GN-BR401.
Step 6. Insert the adapter to the power socket.
Step 7. The connection procedure is completed.
2-4. Connection for USB Port User (
If you use USB connection, please refer to
this section.
)
Please repeat Steps 1~3 of Section 2-3.
Step 4. Connect the USB transmission cable to the USB port of the GN-BR401 and the USB port
at the PC end.
Step 5. Please install the USB driver program by the CD that comes with the GN-BR401.
(Please refer to Appendix B for the installation of the USB driver program).
• PDF • • • • • • • • • • PDF
http://www.fineprint.com